Fujitsu Oracle SPARC M12-2 User Manual

Caution -
Observe the precautions related to electrostatic discharge (ESD) as
described in Table 1-1 to ensure the safety of personnel and the system.
SPARC M12-2/M12-2S.
■
Do not insert any foreign object into the openings of the SPARC M12-2/M12-2S.
Any object that touches high-voltage circuitry or causes a unit to short circuit may
cause a fire or electric shock.
Safety precautions when working with electricity
■
Confirm that the voltage and frequency of your input power match the electrical
rating described on the system nameplate label affixed on the server.
■
Wear a wrist strap when handling the internal storage (HDD/SSD), CPU memory
unit (upper/lower), memory, or other printed circuit boards.
■
Use grounded power outlets.
■
Do not attempt to make any mechanical or electrical modifications. Fujitsu
Limited shall not be responsible for regulatory compliance of a modified SPARC
M12-2/M12-2S.
Safety precautions regarding racks
■
The rack must be fixed to the floor, ceiling, or nearest frame.
■
The quakeresistant options kit may be supplied with the rack. The use of the
quakeresistant options kit prevents the rack from falling over during the
installation or maintenance of the SPARC M12-2/M12-2S.
■
In the following case, a safety evaluation must be performed by a field engineer
before installation or maintenance.
- When the quakeresistant options kit is not supplied and the rack is not fixed to
the floor with bolts: Check safety such as whether the rack may fall.
■
When mounting multiple SPARC M12-2/M12-2S units in the rack, see "Planning
and Preparing for System Installation" in the Installation Guide for your server.
1.5 Precautions on Static Electricity
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 20236

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English