Fujitsu Oracle SPARC M12-2 User Manual

Note -
You can replace the CMUL and replace, add, and remove CMUU units.
Caution -
The CMUU weighs 10 kg (22 lb), and the CMUL weighs 13 kg (29 lb). Work
must be done by two people if the server is mounted at the 24U or higher position of
the rack. If the work is done by one person, it may result in an
injury or damage to
the server.
Chapter 17
Maintaining the CPU Memory Unit and
Memory
This section describes the maintenance procedures for the CMU and memory
mounted in the SPARC M12.
■
Maintenance Precautions
■
Locations of the CMU and Memory
■
Before Maintenance on the CMU and Memory
■
Removing the CMU or Memory
■
Installing the CMU and Memory
17.1 Maintenance Precautions
Note the following points when you maintain the CMU.
■
If you have replaced the CMUL that has the hardware RAID function enabled,
re-enable the hardware RAID volume. For details, see "14.2.11 Re-enabling a
Hardware RAID Volume" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
System Operation and Administration Guide.
■
When you add or remove a CMUU, a root complex is also added or removed. As a
result, the PCIe card installation rules and the physical device paths may change,
making it necessary to reconfigure the logical domains. For details, see "7.2
Precautions for FRU Expansion" or "7.3 Precautions
for FRU Reduction."
435

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English