Fujitsu Oracle SPARC M12-2

Table 5-4
Active/Cold Addition Procedure of a PCIe Card (continued)
Work
Order
Task Reference
5 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
7 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration, and removing the power
cords
"9.6.1 Releasing
the SPARC M12-2S
From the Building Block Configuration"
"9.8.2 Removing the Power Cords"
8Removing the PCICS from the SPARC
M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
9Removing the PCIe card filler from the
PCICS
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
10 Installing a PCIe card in
the PCICS to
install it in the SPARC M12-2S
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
11 Installing the power cords on the SPARC
M12-2S with the added PCIe card, and
incorporating it into the building block
configuration
"10.1.1 Installing a Power Cord"
"10.4.1 Incorporating the SPARC
M12-2S Into
a Building Block
Configuration"
12 Diagnosing the SPARC M12-2S with the
added PCIe card
"10.5.1 Diagnosing the SPARC M12
Hardware"
13 Confirming that there is no problem with
the added PCIe card
"10.5.3 Checking the FRU Status After
Maintenance"
14 Incorporating the SPARC M12-2S with
the added PCIe card into the physical
partition
"
10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR DR"
15 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
16 Assigning the I/O resource to a logical
domain
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10
Domain Configuration
Guide
5.2.2 Active/Cold Addition Workflow of the HDD/SSD
You can perform active/cold addition of the HDD/SSD in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before adding the HDD/SSD, see "Precautions for HDD/SSD addition" in "7.2
Precautions for FRU Expansion."
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023156