Fujitsu Oracle SPARC M12-2 User Manual

Table 6-27
System-Stopped/Cold Removal Procedure of the SPARC M12-2S
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Checking the I/O device usage status of
the SPARC M12-2S to be removed
"9.2.2 Checking the Assignment Status
of I/O Devices"
3 Checking the HDD/SSD usage status of
the SPARC M12-2S to be removed
"9.2.3 Checking the Usage of the
HDD/SSD"
4 Powering off all physical partitions "9.5.2 Stopping All Physical Partitions"
5 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
6 Releasing the SPARC M12-2S to be
removed, from the physical partition
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration
"
7 Releasing the SPARC M12-2S from the
building block configuration
"9.7 Removing the SPARC M12-2S"
8 Diagnosing all the connected SPARC
M12-2S units
"10.5.1 Diagnosing the SPARC M12
Hardware"
9 Confirming that there is no problem with
the SPARC M12-2S released from the
physical partition
"10.5.3 Checking the FRU Status After
Maintenance"
10 Switching
the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
11 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
12 Checking the operating condition of the
system (*2)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
13 Saving logical domain configuration
information
"9.1.1 Saving
Logical Domain
Configuration Information"
*1 If the removal of the SPARC M12-2S does not affect logical domains, this work is not required.
*2 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
6.6.6 System-Stopped/Cold Removal Workflow of the
SPARC M12-2S
You can perform system-stopped/cold removal of the SPARC M12-2S in the
following configuration:
■
Multiple-BB configuration
Before removing the SPARC M12-2S, see "Precautions for SPARC M12-2S removal"
in "7.3 Precautions for FRU Reduction."
Table 6-27 shows the workflow for system-stopped/cold removal of the SPARC M12-2S.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023226

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English