Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
showpcl -a
PPAR-ID LSB PSB Status
00 Running (*1)
00 00-0 (*2)
01 01-0
XSCF>
*1 Operation status of a physical partition
*2 BB-ID (PSB number) and LSB number of the SPARC M12-2S composing physical partition #00
XSCF>
showboards -p 0
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal (*1)
01-0 00(01) Assigned y y y Passed Normal
XSCF>
*1 The physical partition of PPAR-ID#00 is composed of PSB#00-0 (BB-ID#00) and PSB#01-0 (BB-ID#01), and both
are operating normally.
8.1.5 Checking the Operation Status of Physical
Partitions
Before changing the physical partition configuration or performing hardware
maintenance, log in to the XSCF shell and check the operation status of the target
physical partition and the PSB configuration.
The following example shows the information displayed by the command that
checks the operation status of a physical partition. For details
on the individual
commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference
Manual of the XCP firmware version used.
Checking the operation status of physical partitions
Checking the PSBs composing a physical partition and their operation
status
8.1.6 Checking FRU Information
FRU information includes detailed information on hardware. Log in to the XSCF
shell and check FRU information when ordering hardware for expansion or
Chapter 8 Preparation for Maintenance 245

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English