Fujitsu Oracle SPARC M12-2 User Manual

*1 The space from 0x740000000000 to 0x7407ffffffff (32 GB) is assigned to the logical domain Idom.
primary#
ldm list-domain
NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME
primary active -n-cv- UART 32 16G 0.0% 0.0% 5d 19h
26m (*1)
guest active -n---- 5000 32 16G 0.0% 0.0% 5d 18h
12m (*2)
ldom active -n---- 5001 64 32G 0.0% 0.0% 5d 19h
29m
primary#
*1 The control domain is in operation with 32 cores of virtual CPUs and 16 GB of memory assigned.
*2 The domain (guest) is in operation with 32 cores of virtual CPUs and 16 GB of memory assigned.
primary#
ldm list-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100 (*1)
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP
DEFAULT-VLAN-ID
PVID VID MTU MODE INTER-VNET-LINK
primary-vsw0 primary 00:14:4f:fb:e1:a8 net0 0 switch@0
1 (*2)
1 1500 on
primary-vsw4 primary 00:14:4f:f8:42:2f net4 1 switch@1
1 (*3)
1 1500 on
VDS
9.2.2 Checking the Assignment Status of I/O Devices
Log in to Oracle Solaris on the control domain to check the operation status of logical
domains and the assignment status of resources such as I/O devices to logical domains.
For details on the commands used here, see "3.2 Operations and Commands
Related to Logical Domain Configurations" in the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration Guide.
1.
Check the operation status of logical domains.
The following example shows execution of the command for checking the
operation status of logical
domains defined in the physical partition.
2.
Check the virtual services that are configured in the control domain.
The following example shows execution of the command for checking the virtual
services configured in the control domain.
Chapter 9 Releasing FRUs From the System 267

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English