Fujitsu Oracle SPARC M12-2 User Manual

NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary vdisk00 /dev/zvol/dsk/rpool/
export/ovm/vdisk00 (*4)
disk01 /dev/zvol/dsk/rpool/
export/ovm/vdisk01
vol_iso ro /export/ovm/sol11u3_iso/
sol-11_3-text-sparc.iso
vdisk10 /dev/zvol/dsk/rpool/
export/ovm/vdisk10
vdisk11 /dev/zvol/dsk/rpool/
export/ovm/vdisk11
#
*1 The set port number of a virtual console is in a range of 5000 to 5100.
*2 The physical LAN port net0 is assigned to the virtual switch primary-vsw0.
*3 The physical LAN port net4 is assigned to the virtual switch primary-vsw4.
*4 vdisk00 is assigned to the virtual disk service
primary-vds0.
#
dladm show-phys -L
LINK DEVICE LOC
net0 ixgbe0 /BB0/CMUL (*1)
net1 ixgbe1 /BB0/CMUL
net2 ixgbe2 /BB0/CMUU
net3 ixgbe3 /BB0/CMUU
(Omitted)
*1 The location of net0 is the on-board LAN of BB#00.
#
ldm list-bindings guest
NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME
guest active -n---- 5000 32 16G 0.0% 0.0% 7d 18h 55m
(Omitted)
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID
MTU MAXBW LINKPROP
vnet0 primary-vsw0@primary 0 network@0 00:14:4f:f9:58:4e 1
1500 (*1)
PEER MAC MODE PVID VID MTU
MAXBW
LINKPROP
primary-vsw0@primary 00:14:4f:fb:e1:a8 1 1500
3.
Check the physical locations of the physical LAN ports.
The following example shows execution of the command for checking the
physical locations of the physical LAN ports.
4.
Check the assignment status of resources to logical domains.
The following example shows execution of the command for checking the
resources assigned to a
logical domain (domain name: guest).
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023268

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English