Fujitsu Oracle SPARC M12-2 User Manual

Table 8-3
Correspondence Between Memory and Types
FRU Type Indicator Configuration
Memory 81 DDR4 R-DIMM 8 GB 1 Rank
83 DDR4 R-DIMM 16 GB 1 Rank
85 DDR4 R-DIMM 32 GB 2 Rank
87 DDR4 R-DIMM 64 GB 4 Rank
91 DDR4 R-DIMM 64 GB 2 Rank
Note -
The FRU type indicator may vary depending on the hardware configuration. See
"Information on SPARC M12 System Hardware" in the Fujitsu SPARC M12 Product Notes for
the latest XCP version.
8.2 Troubleshooting
This section describes the troubleshooting procedure.
In the following cases with suspected fault conditions, use the troubleshooting flow
to identify the fault location. For the troubleshooting flow, see "8.2.1 Confirming
Whether There is a Fault."
■
When the CHECK LED is on
■
When an error message is displayed on the console
■
When an error is displayed as a result of executing a command for checking the
status
■
When an error is displayed in the error log
8.2.1 Confirming Whether There is a Fault
This section describes the flow for confirming whether there is a fault. Apply the flow
below for a fault in the PCI expansion unit too.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023248

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English