Fujitsu Oracle SPARC M12-2 User Manual

Table 4-11
Active/Cold Replacement Procedure of the FANU
Work
Order
Task Reference
1 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu
SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3
Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
6 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
7Placing the SPARC M12-2S requiring
maintenance into the cold state
"9.8.2 Removing the Power Cords"
8Removing the FANU from the SPARC
M12-2S
"14.3.1 Removing a FANU"
9
Installing the FANU in the SPARC M12-2S "14.4.2 Installing a FANU"
10 Placing the SPARC M12-2S that required
maintenance into the hot state
"10.1.1 Installing a Power Cord"
11 Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
12 Confirming that there is no problem with
the
replacement FANU
"10.5.3 Checking the FRU Status After
Maintenance"
4.2.4 Active/Cold Replacement Workflow of the FANU
You can perform active/cold replacement of the FANU in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before replacing the FANU, see "Precautions for FANU replacement" in "7.1
Precautions for FRU Replacement."
Table 4-11 shows the workflow for active/cold replacement of the FANU.
Chapter 4 FRU Replacement Workflows 81

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English