Fujitsu Oracle SPARC M12-2 User Manual

Table 6-5
Active/Cold Removal Procedure of the HDD/SSD
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing the logical domain assignment
of all the HDD/SSD and PCIe cards
mounted in the SPARC M12-2S requiring
maintenance
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the HDD/SSD and PCIe
cards
mounted in the SPARC M12-2S requiring
maintenance, from the system
"9.4 Enabling the Removal of Hardware"
6 Confirming that you can release the
SPARC M12-2S
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
7 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
8 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control
Function"
9 Confirming that the physical partition
and logical domains continue operating
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
10 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
11 Removing the HDD/SSD from the
SPARC M12-2S
"
15.3.1 Removing an HDD/SSD"
12
Installing a filler unit in the SPARC M12-2S "15.4.2 Installing a Filler Unit"
6.2.2 Active/Cold Removal Workflow of the HDD/SSD
You can perform active/cold removal of the HDD/SSD in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before removing the HDD/SSD, see "Precautions for HDD/SSD removal" in "7.3
Precautions for FRU Reduction."
Table 6-5 shows the workflow for active/cold removal of the HDD/SSD.
Chapter 6 FRU Removal Workflows 195

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English