Fujitsu Oracle SPARC M12-2 User Manual

Table 5-7
Active/Cold Addition Procedure of Memory (continued)
Work
Order
Task Reference
16 Assigning the resources of the added
SPARC M12-2S to logical domains
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
*1 If the CMUU has no memory installed, install memory before installing the CMUU in the SPARC M12-2S.
*2 If the memory was added to a SPARC M12-2S with no PCIe cards mounted, no diagnosis is necessary (because
diagnosis was performed in the previous step).
Table 5-8
Active/Cold Addition Procedure of a PCI Expansion Unit
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing the logical domain assignment
of PCIe cards mounted in the SPARC
M12-2S requiring maintenance
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the SPARC M12-2S requiring
maintenance from the physical
partition
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
5.2.5 Active/Cold Addition Workflow of the PCI
Expansion Unit
You can perform active/cold addition of a PCI expansion unit in the following
configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before adding the PCI expansion unit, mount it in the rack. (See "3.4 Mounting the
SPARC M12-2S and the PCI Expansion Unit in a Rack" in the Fujitsu SPARC M12-2S
Installation Guide.)
Table 5-8 shows the workflow for active/cold
addition of a PCI expansion unit.
Chapter 5 FRU Addition Workflows 161

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English