Fujitsu Oracle SPARC M12-2

1
1
2
Caution -
Do not pull the XSCF BB control cable itself. Otherwise, the cable may be
damaged and the system may fail to operate normally.
Figure 22-5
Removing the XSCF BB Control Cable (Crossbar Box)
22.4 Installing the XSCF BB Control Cable
This section describes the procedure for installing the XSCF BB control cable.
1.
Affix labels to the XSCF BB control cable.
Affix the labels filled out in step 2 of "22.3 Removing the XSCF BB Control
Cable" to the XSCF BB control cable (Figure 22-6).
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023522