Fujitsu Oracle SPARC M12-2 User Manual

Table 5-25
System-Stopped/Cold Addition Procedure of Memory
Work
Order
Task Reference
1 Powering off all physical partitions "9.5.2 Stopping All Physical Partitions"
2 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
3Removing the power cords of all the
SPARC M12-2S units
"9.8.2 Removing the Power Cords"
4Removing the CMU from the SPARC
M12-2S
"17.4 Removing the CMU or Memory"
5 Installing memory in the CMU and
installing this unit in the SPARC M12-2S
"17.5 Installing the CMU and Memory"
6 Connecting the power cords of all the
SPARC M12-2S units
"10.1.1 Installing a Power Cord"
7 Diagnosing all the SPARC M12-2S units "10.5.1 Diagnosing the SPARC M12
Hardware"
8 Confirming that there is no
problem with
the added memory
"10.5.3 Checking the FRU Status After
Maintenance"
9 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
10 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
11 Assigning the resources of the expanded
memory to logical domains
"3.2 Operations and Commands
Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
5.6.5 System-Stopped/Cold Addition Workflow of the
PCI Expansion Unit
Before adding the PCI expansion unit, mount it in the rack. (See "3.3 Mounting the
SPARC M12-2 and the PCI Expansion Unit in a Rack" in the Fujitsu SPARC M12-2
Installation Guide or "3.4 Mounting the SPARC M12-2S and the PCI Expansion Unit
in a Rack" in the Fujitsu SPARC M12-2S
Installation Guide.)
Table 5-26 shows the workflow for system-stopped/cold addition of a PCI expansion
unit.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023184

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English