Fujitsu Oracle SPARC M12-2 User Manual

Table 4-15
Active/Cold Replacement Procedure of the OPNL (continued)
Work
Order
Task Reference
7Placing the SPARC M12-2S requiring
maintenance into the cold state, and
removing the OPNL from the SPARC
M12-2S
"16.3 Removing the HDDBPU or OPNL"
8 Installing the OPNL on the SPARC M12-2S,
and placing the SPARC M12-2S that
required maintenance into the hot state
(*1)
"16.4 Installing the HDDBPU or OPNL"
9 Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
10 Confirming that there is no problem with
the replacement
OPNL
"10.5.3 Checking the FRU Status After
Maintenance"
11 Incorporating the SPARC M12-2S that
required maintenance into the physical
partition
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR DR"
12 Incorporating I/O resources of the SPARC
M12-2S requiring maintenance into a
logical domain
"10.7 Incorporating I/O Resources Into a
Logical
Domain"
13 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
*1 Confirm that the set BB-ID is the same as that of the faulty OPNL.
Table 4-16
Active/Cold Replacement Procedure of the CMU
Work
Order
Task Reference
1 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu
SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4.2.9 Active/Cold Replacement Workflow of the CMU
You can perform active/cold replacement of the CMU in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before replacing the CMU, see "Precautions for CMU and memory replacement" in
"7.1 Precautions for FRU Replacement."
Table 4-16 shows the workflow for active/cold replacement of the CMU.
Chapter 4 FRU Replacement Workflows 87

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English