Fujitsu Oracle SPARC M12-2

1.2.2 Standard Label
The standard label is affixed in the center of the right side of the SPARC M12-2/
M12-2S chassis as seen from the front (Figure 1-2). The standard label describes the
standards for which certification has been obtained.
■
Safety: UL/cUL and BIS
■
Radio wave: VCCI, FCC, ICES, and KCC
■
Safety and radio wave: CE, BSMI, EAC, and RCM
Figure 1-2
Location of the Standard Label
For the latest information on the standards for which certification has been obtained,
see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide.
The design of the standard label may differ depending
on when the product is
purchased.
Chapter 1 Before Starting Maintenance Work 3