Fujitsu Oracle SPARC M12-2

A
B
NEAR to END
Caution -
You need to pull out the CMUL completely from the server before lifting it
up. Lifting up the CMUL before pulling it out completely may damage the CMUL
due to interference with the internal components.
Note -
After removing the CMUL from the server, place it horizontally on the workbench
gently to avoid mechanical shock.
Figure 17-16
Removing the CMUL
17.4.3 Removing Memory
This section describes the procedure for removing the memory mounted in the CMU.
Unless otherwise noted, the description provided herein applies to both the CMUL
and CMUU.
Chapter 17 Maintaining the CPU Memory Unit and Memory 449