Fujitsu Oracle SPARC M12-2 User Manual

Table 5-23
System-Stopped/Cold Addition Procedure of the HDD/SSD
Work
Order
Task Reference
1 Powering off all physical partitions "9.5.2 Stopping All Physical Partitions"
2 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
3Removing the power cords of all the
SPARC M12-2/M12-2S units
"9.8.2 Removing the Power Cords"
4Removing the filler unit from the SPARC
M12-2/M12-2S
"15.3.2 Removing a Filler Unit"
5 Installing an HDD/SSD in the SPARC
M12-2/M12-2S
"15.4.1 Installing an HDD/SSD"
6 Connecting the power cords of all the
SPARC M12-2/M12-2S units
"10.1.1 Installing a Power Cord"
7 Diagnosing the SPARC M12-2/M12-2S
with the added HDD/SSD
"10.5.1 Diagnosing the SPARC M12
Hardware"
8 Confirming that there is no problem with
the added HDD/SSD
"10.5.3
Checking the FRU Status After
Maintenance"
9 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
10 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
11 Assigning the I/O resource to a logical
domain
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
5.6.3 System-Stopped/Cold Addition Workflow of the
CMUU
Before adding the CMUU, see "Precautions for CMUU expansion" in "7.2
Precautions for FRU Expansion."
Table 5-24 shows the workflow for system-stopped/cold addition of the CMUU.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023182

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English