Fujitsu Oracle SPARC M12-2 User Manual

primary#
ldm start-domain guest
primary
# ldm list-io
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
<Omitted>
/BB0/PCI5/IOVNET.PF0.VF0 VF PCIE3 guest
primary#
primary
# ldm list-services
<Omitted>
VSW
NAME LDOM MACADDRESS NET-DEV DVID|PVID|VIDs
---- ---- ---------- ------- --------------
primary-vsw primary 00:14:4f:f9:00:e8 net0 1|1|--
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds primary vol /dev/
zvol/dsk/rpool/guest
primary#
primary
# ldm add-vnet vnet0 primary-vsw guest
primary
# ldm add-vdisk vdisk0 vol@primary-vds guest
9.
Confirm that the SR-IOV virtual function is assigned to the logical domain.
This example confirms that the SR-IOV virtual function created in step 3 is
assigned to the logical domain guest.
10.7.5 Incorporating Virtual I/O Devices Into a Logical
Domain
This section describes the procedure for incorporating a virtual I/O device into a
logical domain.
For details on how to set the virtual service, see "3.2.12 Setting the Default Services"
in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
1.
Check the virtual service.
This example checks that the
virtual service is set in Oracle Solaris on the control
domain.
2.
Incorporate virtual devices into a logical domain.
This example incorporates virtual network device vnet0 and virtual disk vdisk0
into the logical domain guest in Oracle Solaris on the control domain.
3.
Confirm that the virtual devices are incorporated in the logical
domain.
This example confirms that virtual network device vnet0 and virtual disk vdisk0
Chapter 10 Setting Up the System 367

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English