Fujitsu Oracle SPARC M12-2 User Manual

primary#
ldm start-reconf primary
primary#
ldm create-vf /BB0/PCI5/IOVNET.PF0
primary
# ldm list-io
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
<Omitted>
/BB0/PCI5/IOVNET.PF0.VF0 VF PCIE3
primary#
primary#
shutdown -i6 -g0 -y
primary#
ldm stop-domain guest
primary#
ldm add-io /BB0/PCI5/IOVNET.PF0.VF0 guest
2.
Set the delayed reconfiguration mode for the control domain or root domain
to which the physical function (PF) of SR-IOV is assigned.
In this example, the delayed reconfiguration mode is set for the control domain.
3.
Create the SR-IOV virtual function.
Create the SR-IOV virtual function in Oracle Solaris on the control
domain.
This example creates the SR-IOV virtual function with the PCIe card mounted in
PCI#5 of BB#00.
4.
Confirm that the SR-IOV virtual function was created.
This example confirms the SR-IOV virtual function created in step 3 in Oracle
Solaris on the control domain.
5.
Restart Oracle Solaris on the control domain or
service domain for which the
delayed reconfiguration mode has been set.
In this example, the control domain is restarted.
6.
Stop the logical domain to which the SR-IOV virtual function is assigned.
This example stops logical domain guest to which the SR-IOV virtual function is
assigned.
7.
Assign the SR-IOV virtual function to a
logical domain.
This example assigns the SR-IOV virtual function created in step 3 to the logical
domain guest in Oracle Solaris on the control domain.
8.
Start the logical domain to which the SR-IOV virtual function was assigned.
This example starts logical domain guest.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023366

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English