Fujitsu Oracle SPARC M12-2 User Manual

Table 4-30
Inactive/Cold Replacement Procedure of a PCIe Card
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Confirming the PCIe card to be replaced "8.2 Troubleshooting"
3 Checking the operation status of the
SPARC M12-2S that houses the PCIe card
to be replaced
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu
M10/SPARC M10 Service
Manual
4 Powering off the physical partition
containing the SPARC M12-2S that
houses the PCIe card requiring
maintenance
"9.5.1 Stopping a Specific Physical
Partition"
5 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
6 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
"9.6.1
Releasing the SPARC M12-2S
From the Building Block Configuration"
7Placing the SPARC M12-2S requiring
maintenance into the cold state
"9.8.2 Removing the Power Cords"
8Removing the faulty PCIe card from the
SPARC M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
9Removing the faulty PCIe card from the
PCICS
"12.3.2
Removing a PCIe Card or PCIe
Card Filler"
10 Installing the replacement PCIe card in
the PCICS to install it in the SPARC M12-2S
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
11 Placing the SPARC M12-2S that required
maintenance into the hot state
"10.1.1 Installing a Power Cord"
12 Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
13 Diagnosing the SPARC
M12-2S requiring
maintenance
"10.5.1 Diagnosing the SPARC M12
Hardware"
4.4.2 Inactive/Cold Replacement Workflow of a PCIe
Card
You can perform inactive/cold replacement of a PCIe card in the following
configuration:
■
Building block configuration where two or more physical partitions are operating
Before replacing the PCIe card, see "Precautions for PCIe card replacement" in "7.1
Precautions for FRU Replacement."
Table 4-30 shows the workflow for inactive/cold replacement of a PCIe card.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023106

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English