Fujitsu Oracle SPARC M12-2 User Manual

Table 5-5
Active/Cold Addition Procedure of the HDD/SSD
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing the logical domain assignment
of PCIe cards mounted in the SPARC
M12-2S requiring maintenance
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the SPARC M12-2S requiring
maintenance from the physical
partition
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
7 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration, and removing the power
cords
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
"
9.8.2 Removing the Power Cords"
8Removing the filler unit from the SPARC
M12-2S
"15.3.2 Removing a Filler Unit"
9 Installing an HDD/SSD in the SPARC
M12-2S
"15.4.1 Installing an HDD/SSD"
10 Installing the power cords on the SPARC
M12-2S with the added HDD/SSD, and
incorporating it into the building block
configuration
"10.1.1 Installing
a Power Cord"
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
11 Diagnosing the SPARC M12-2S with the
added HDD/SSD
"10.5.1 Diagnosing the SPARC M12
Hardware"
12 Confirming that there is no problem with
the added HDD/SSD
"10.5.3 Checking the FRU Status After
Maintenance"
13 Incorporating the SPARC M12-2S with
the
added HDD/SSD into the physical
partition
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR DR"
14 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
Table 5-5 shows the workflow for active/cold addition of the HDD/SSD.
Chapter 5 FRU Addition Workflows 157

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English