Fujitsu Oracle SPARC M12-2 User Manual

Table 6-22
System-Stopped/Cold Removal Procedure of a PCIe Card
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Releasing the assignment of the I/O
resources of the PCIe card to be removed
"9.3 Releasing I/O Resources From a
Logical Domain"
3 Confirming that you can remove the PCIe
card to be removed
(*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
4Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
5 Powering off all physical partitions "9.5.2 Stopping All Physical Partitions"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
7Removing the power cords of
all the
SPARC M12-2/M12-2S units
"9.8.2 Removing the Power Cords"
8Removing the PCICS in which the PCIe
card to be removed is mounted from the
SPARC M12-2/M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
9Removing the PCIe card from the PCICS "12.3.2 Removing a PCIe Card or PCIe
Card Filler
"
10 Installing a PCIe card filler in the PCICS,
and installing the PCICS in the SPARC
M12-2/M12-2S
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
11 Installing the power cords of all the
SPARC M12-2/M12-2S units
"10.1.1 Installing a Power Cord"
12 Powering on the physical partition
containing the SPARC M12-2/M12-2S that
underwent maintenance
"10.9.1 Starting the System With an
XSCF Command"
13 Confirming that there is no problem with
the system from which the PCIe card was
removed
"10.5.3 Checking the FRU Status After
Maintenance"
14 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
15 Checking the operating condition of
the
physical partition and logical domains (*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
16 Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
*1 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide. If you have reconfigured a
logical domain, save the logical domain configuration information.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023220

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English