Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
version -c xcp
BB#00-XSCF#0 (Master)
XCP0 (Reserve): 3020 (*1)
XCP1 (Current): 3020 (*2)
BB#01-XSCF#0 (Standby)
XCP0 (Reserve): 3020
XCP1 (Current): 3020
XSCF>
*1 Version of the XCP firmware installed at Reserve on the SPARC M12-2S with BB-ID 00
*2 Version of the XCP firmware running on the SPARC M12-2S with BB-ID 00
XSCF>
ioxadm list
PCIBOX Link
PCIBOX#2007 BB#00-PCI#7 (*1)
PCIBOX#2006 BB#00-PCI#5
PCIBOX#2005 BB#00-PCI#3
PCIBOX#2004 BB#00-PCI#1
*1 Mounting locations of the PCI expansion unit and link card
XSCF>
ioxadm -v list
Location Type FW Ver Serial Num Part Num
State
PCIBOX#2007 PCIBOX - PZ21242007 On
PCIBOX#2007/PSU#0 PSU - FEJD1212000521 CA01022-0750-D/7060988 On
PCIBOX#2007/PSU#1 PSU - FEJD1201000738 CA01022-0750-D/7060988 On
PCIBOX#2007/IOB IOBOARD 1310 PP12470297 CA20365-B66X 010AJ/7061033 On
(*1)
PCIBOX#2007/LINKBD BOARD - PP1244027P CA20365-B60X 001AA/7061035 On
PCIBOX#2007/FANBP FANBP - PP12470298 CA20365-B68X 005AD/7061025 On
BB#00-PCI#1 CARD 1310 PP124401LZ
CA20365-B59X 001AA/7061040 On
(*2)
The following example shows the display by the version command.
Checking the PCI expansion unit firmware version
The PCI expansion unit firmware is installed on the link card mounted in the SPARC
M12-2/M12-2S and on the I/O board mounted in the PCI expansion unit. You need to
check the version on each of them.
To check the PCI expansion unit firmware version, log in to the XSCF shell
and
execute the ioxadm command.
1.
Identify the mounting locations of the PCI expansion unit and link card.
2.
Check the firmware version on the PCI expansion unit and link card.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023242

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English