Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
snapshot -d usb0 -L F -r -a -v
Testing writability of USB device....SUCCESS
About to remove all files from device 'usb0'. Continue? [Y|N] :
y
BB#00: start to execute snapshot
BB#01: start to execute snapshot
.
.
Collecting data into /media/usb_msd/<hostname>_<ipaddress>_<date>.zip
Data collection complete.
XSCF>
snapshot -t <a>root@ssh_server:/home/snapshot/ -L F -v -a
Downloading Public Key from 'ssh_server'...
Enter ssh password for user 'root' on host 'ssh_server':
Setting up ssh connection to <a>root@ssh_server...
Collecting data into root@ssh_server:/home/snapshot/M12-2S_192.168.1.100_
2016-09-12T06-53-39.zip
BB#00: start to execute snapshot
When collecting data in USB memory
1.
Connect the USB memory to the USB port on the XSCFU.
Figure 8-2
Connecting the USB Memory
2.
Execute the snapshot command to collect XSCF log information.
The following example collects all the XSCF log information for a building block
configuration.
When collecting information on the SSH server
1.
Execute the snapshot command to collect XSCF log information.
Note that the content of the message may differ depending on the firmware
version.
Chapter 8 Preparation for Maintenance 259

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English