Fujitsu Oracle SPARC M12-2 User Manual

Table 5-27
System-Stopped/Cold Addition Procedure of the SPARC M12-2S (continued)
Work
Order
Task Reference
11 Adding the added SPARC M12-2S to the
PPAR configuration list for the physical
partition that is the incorporation
destination
"7.7 Creating a PPAR Configuration
List" in the Fujitsu SPARC M12-2S
Installation Guide
12 Assigning the SPARC M12-2S (system
board) to the physical partition
"7.8.1 Assigning a Physical System
Board (PSB) to a Physical
Partition
(PPAR)" in the Fujitsu SPARC M12-2S
Installation Guide
13 Switching the mode switch on the OPNL
to Locked (*3)
"2.3.2 OPNL Control Function"
14 Registering a CPU Activation key with
the system (*4)
"7.10 Registering a CPU Activation Key"
in the Fujitsu SPARC M12-2S Installation
Guide
15 Assigning CPU core resources to the
physical
partition
"7.11 Assigning CPU Core Resources" in
the Fujitsu SPARC M12-2S Installation
Guide
16 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
17 Assigning the resources of the added
SPARC M12-2S to logical domains
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
*1 Before adding the SPARC M12-2S, switch the mode switch on its OPNL to Service.
*2 If the XCP firmware version on the maintenance part is different from that on the existing system, the message
"XSCF firmware update now in progress. BB#xx, please wait for XSCF firmware update complete." appears at
login
to the XSCF. Then, the XCP firmware version will be automatically matched. The version matching takes
time. Execute the showlogs monitor command, and check for the "XCP update has been completed" message. The
displayed message indicates the completion of the XCP firmware update.
*3 Also switch the mode switch on the OPNL
of the added SPARC M12-2S to Locked.
*4 One CD-ROM disk containing a CPU Activation certificate is provided with the system. The CPU Activation
key ordered together with the SPARC M12-2S was registered with the system before shipment.
Chapter 5 FRU Addition Workflows 187

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English