Fujitsu Oracle SPARC M12-2 User Manual

#
zpool status
pool: rpool
state: ONLINE
scan: resilvered 203G in 29m13s with 0 errors on Fri Jan 1 09:00:00 2016
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0 (*1)
c1t50000393D8289242d0 ONLINE 0 0 0 (*2)
c0t500003942823FC18d0 ONLINE 0 0 0 (*2)
errors:
No known data errors
#
*1 The state and RAID level of the ZFS volume are displayed.
*2 The physical device with the ZFS volume configuration and its state are displayed.
#
./sas2ircu 0 display
LSI Corporation SAS2 IR Configuration Utility.
Version 17.00.00.00 (2013.07.19)
Copyright (c) 2009-2013 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
(Omitted)
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1 (*1)
(Omitted)
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
SPARC M12 server.
For details on the commands for checking the ZFS volumes, see the document
concerning ZFS file system management applicable to your Oracle Solaris version. To
check the hardware RAID volume, use the sas2ircu command of the SAS2IRCU
utility. For details on how to obtain the SAS2IRCU utility and
the user guide, see
"Obtaining SAS-2 Integrated RAID Configuration Utility" in the latest version of the
Fujitsu SPARC M12 Product Notes.
Checking ZFS mirror volumes
The following example shows a mirrored ZFS volume.
Checking hardware RAID volumes
The following example shows a RAID volume configured by the hardware RAID
function.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023270

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English