Fujitsu Oracle SPARC M12-2 User Manual

/BB1/PCI6 PCIE PCIE12 primary EMP
(Omitted)
primary
# ldm stop-domain guest
LDom guest stopped
primary#
ldm remove-io /BB1/PCI5 guest
primary#
ldm start-reconf primary
Initiating a delayed reconfiguration operation on the primary domain.
All configuration changes for other domains are disabled until the primary
domain reboots, at which time the new configuration for the primary domain
will also take effect.
primary#
ldm add-io /BB1/PCI5 primary
primary#
shutdown -i6 -g0 -y
primary#
ldm list-io
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
(Omitted)
/BB1/PCI4 PCIE PCIE13 primary EMP
/BB1/PCI5 PCIE PCIE11 primary OCC
/BB1/PCI6 PCIE PCIE12 primary EMP
(Omitted)
2.
Stop the I/O domain assigned the PCIe endpoint to be released.
Stop the I/O domain guest.
3.
Release the PCIe endpoint from the I/O domain.
Release PCI slot #5 of the SPARC M10-2S of BB-ID#01 from the I/O domain
guest.
4.
Set delayed reconfiguration for the control domain or root domain.
In this example,
delayed reconfiguration is set for the control domain.
5.
Assign the released PCIe endpoint to the control domain or root domain.
Assign PCI slot #5 of the SPARC M12-2S of BB-ID#01 to the control domain.
6.
Restart Oracle Solaris on the control domain or root domain (the one set for
delayed reconfiguration in
step 4).
7.
Confirm that the PCIe endpoint was released from the I/O domain.
Confirm that PCI slot #5 of the SPARC M12-2S of BB-ID#01 has been assigned to
the control domain.
Chapter 9 Releasing FRUs From the System 285

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English