Fujitsu Oracle SPARC M12-2 User Manual

primary#
ldm start-reconf guest
Initiating a delayed reconfiguration operation on the ldom domain.
All configuration changes for other domains are disabled until the ldom
domain reboots, at which time the new configuration for the ldom domain
will also take effect.
primary#
ldm remove-io PCIE10 guest
------------------------------------------------------------------------------
Notice: The ldom domain is in the process of a delayed reconfiguration.
Any changes made to the ldom domain will only take effect after it reboots.
------------------------------------------------------------------------------
primary#
ldm stop-domain -r guest
------------------------------------------------------------------------------
Notice: The ldom domain is in the process of a delayed reconfiguration.
Any changes made to the ldom domain will only take effect after it reboots.
------------------------------------------------------------------------------
Reboot request sent to ldom
primary#
ldm list-io
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
(Omitted)
PCIE8 BUS PCIE8 primary IOV
PCIE9 BUS PCIE9 primary IOV
PCIE10 BUS PCIE10
PCIE11 BUS PCIE11 primary IOV
(Omitted)
the root complex.
In this example, delayed reconfiguration is set for the root domain guest.
3.
Release the root complex from the control domain or root domain.
Release the assignment of the root complex PCIE10 from the root domain guest.
4.
Restart Oracle Solaris on the control domain or root domain that is
set for
delayed reconfiguration.
In this example, Oracle Solaris on the root domain guest is restarted.
5.
Confirm that the root complex was released from the logical domain.
Confirm that the root complex PCIE10 was released from guest.
Chapter 9 Releasing FRUs From the System 287

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English