Fujitsu Oracle SPARC M12-2 User Manual

#
ldm remove-vnet vnet1 guest
#
ldm list-bindings guest
(Omitted)
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID
VID MTU
MAXBW LINKPROP
vnet0 primary-vsw0@primary 0 network@0 00:14:4f:f9:58:4e 1
1500
PEER MAC MODE PVID VID MTU MAXBW
LINKPROP
primary-vsw0@primary 00:14:4f:fb:e1:a8 1 1500
(Omitted)
#
ldm remove-vsw primary-vsw4
#
ldm list-bindings primary
(Omitted)
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP
DEFAULT-VLAN-ID PVID VID
MTU MODE INTER-VNET-LINK
primary-vsw0 00:14:4f:fb:e1:a8 net0 0 switch@0 1
1
1500 on
PEER MAC PVID VID MTU MAXBW
LINKPROP INTERVNETLINK
vnet0@guest 00:14:4f:f9:58:4e 1 1500
(Omitted)
#
ldm remove-io PCIE10 ldom
#
ldm list-bindings ldom
(Omitted)
IO
DEVICE PSEUDONYM OPTIONS
pci@8600 PCIE6
pci@8600/pci@4/pci@0/pci@9 /BB0/PCI5
pci@8600/pci@4/pci@0/pci@11 /BB0/PCI6
(Omitted)
on the control domain.
If a mirror volume is configured between multiple SPARC M12-2S units, release
the HDD/SSD mounted in the target SPARC M12-2S from the mirror beforehand.
a. Release the virtual network device vnet1 assigned to the logical domain guest.
b. Delete primary-vsw4, which is set for the physical LAN port net4.
c. Release the assignment of PCIE10 (pci@8a00) from the logical domain ldom.
d. Release the I/O devices of BB#01.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023302

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English