Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
showpparstatus -a
PPAR-ID PPAR Status
00 Running
01 Running
02 Running
03 Running
XSCF>
showdomainstatus -p 0
Logical Domain Name Status
primary Solaris Running
guest00 Solaris Running
guest01 Solaris Running
iodomain Solaris Running
XSCF>
showboards -p 0
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
01-0 01(01) Assigned y y y Passed Normal
02-0 02(02) Assigned y y y Passed Normal
03-0 03(03) Assigned y y y Passed Normal
XSCF>
poweroff -p 0
PPAR-IDs to power off:00
Continue? [y|n] :
y
00 : Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showpparprogress".
PPAR-ID#00.
2.
Check the operation status of the logical domains on the target physical
partition.
The following example checks the operation status of the logical domains
defined in PPAR ID#00.
3.
Check the status of the SPARC M12-2S requiring maintenance.
The following example checks the operation status of the PSB assigned to PPAR
ID#00.
4.
Stop the target physical partition.
The following example instructs PPAR-ID#00 to stop.
The showpparprogress command lets you check the progress of the process of
stopping the physical partition. When a command prompt is returned, it means
that he process of stopping the physical partition is complete.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023306

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English