Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
setdomainconfig -p 0
PPAR-ID :0
Booting config
←
(*1)
(Current) :factory-default
(Next) :factory-default
-----------------------------------------------------------------------------
Index :1
config_name :factory-default
domains :1
date_created:-
-----------------------------------------------------------------------------
Index :2
config_name :ldom-config1
domains :12
date_created:'2016-09-29 18:30:00'
-----------------------------------------------------------------------------
Index :3
config_name :ldom-config2
domains :12
date_created:'2016-10-03 20:53:03'
-----------------------------------------------------------------------------
Select Index of Using config_name :
2
←
(*2)
PPAR-ID of PPAR that will be affected :00
Logical domain config_name will be set
to "ldom-config1".
Continue? [y|n] :
y
←
(*3)
Configuration complete.
XSCF>
*1 The logical domain system configuration is in the factory-default state.
*2 The index number is entered for which the system configuration name of the logical domain is "ldom-config1".
*3 If you enter "y", the physical partition starts with the system configuration of the logical domain selected in (*2).
primary#
ldm init-system -i /ldom_config.xml
←
(*1)
Aug 7 11:22:41 primary syseventd[183]: error restarting syseventconfd - No
child processes
Initiating a delayed reconfiguration operation on the primary domain.
All configuration changes for other domains are disabled until the primary
domain reboots, at which time the new configuration for the primary domain
will also
take effect.
primary#
shutdown -i6 -g0 -y
←
(*2)
Shutdown started. Friday, August 7, 2015 12:49:46 PM JST
Changing to init state 6 - please wait
Restoring the configuration from an XML file
This section describes an example of the operation of restoring the logical domain
system configuration by using the ldm init-system command to read the /ldom_
config.xml file from Oracle Solaris on the control domain.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023330

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English