Fujitsu Oracle SPARC M12-2 User Manual

Note -
The serial number of the server is printed on a label affixed on the front cover. Store
this cover such that it is not mixed up with the front covers of other SPARC M12 units.
FANBPU. This section describes the procedure for removing the FANUs and FANBPU.
1.
Place the server in the cold state.
Stop the power supply to the server to place it in the cold state. For the
procedure for removing the power cords, see "9.8.2 Removing the Power Cords."
2.
Remove the front cover.
For the procedure for removing the front cover, see "9.8.3 Removing the Front
Cover."
3.
Remove all the FANUs
.
Remove all the FANUs mounted in the FANBPU. For details on the procedure,
see "14.3.1 Removing a FANU."
Figure 16-2
Removing the FANUs
4.
Remove the FANBPU.
Loosen the
three fixing screws, and remove the FANBPU. For details, see "14.3.2
Removing the FANBPU."
Chapter 16 Maintaining the HDD Backplane Unit and Operation Panel 423

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English