Fujitsu Oracle SPARC M12-2

Figure 19-13
Returning to the Pre-Maintenance State
6.
Place the server in the hot state.
To perform maintenance after every SPARC M12-2S was placed in the cold state
without using the maintenance menu, install the power cords of every SPARC
M12-2S. For details on installing the power cord on the server, see
"10.1.1
Installing a Power Cord."
Figure 19-14
Installing the Power Cord
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023500