Fujitsu Oracle SPARC M12-2 User Manual

Note -
Affix a label 5 cm (2 in.) away from the XSCF DUAL control cable connector.
Figure 21-7
Label Affixing Positions on the XSCF DUAL Control Cable
2.
Connect the XSCF DUAL control cable.
Figure 21-8
Connecting the XSCF DUAL Control Cable
3.
Place the server in the hot state.
To perform maintenance after every SPARC M12-2S was placed in the cold state
without using the maintenance menu, install the
power cords of every SPARC
M12-2S. For details on installing the power cord on the PSU, see "10.1.1
Installing a Power Cord."
Chapter 21 Maintaining the XSCF DUAL Control Cable 515

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English