• Click on to clear all devices configurations.
• Click on to upload CSV file containing list of devices.
• Click on to copy configuration from one device to another. This can be useful for
easily replace devices and note that this feature works only between devices of same model.
All these operations will be detailed on the next sections.
Global configuration
Global policy
Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN with the
UCM6200 no matter what the Grandstream device model it is. It is divided into two levels:
• Web GUI→Value-added Features→Zero Config→Global Policy
• Web GUI→Value-added Features→Zero Config→Global Templates.
• Global Templates configuration has higher priority to Global Policy configuration.
Global Policy can be accessed in Web GUI→Value-added Features→Zero Config→Global Policy page. On
the top of the configuration table, users can select category in the “Options” dropdown list to quickly navigate to
the category. The categories are:
• Localization: configure display language, data and time.
• Phone Settings: configure dial plan, call features, NAT, call progress tones and etc.
• Contact List: configure LDAP and XML phonebook download.
• Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
• Network Settings: configure IP address, QoS and STUN settings.
• Customization: customize LCD screen wallpaper for the supported models.
• Communication Settings: configure Email and FTP settings
Select the checkbox on the left of the parameter you would like to configure to activate the dropdown list for this
parameter.
To Next Page
Loading...
Need help?
General
