CHANGE LOG
This section documents significant changes from previous versions of the UCM6200 user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.
Firmware Version 1.0.20.38
• Added support for FQDN and IP address format in the Realm for Digest Authentication field. [Realm For
Digest Authentication]
• Added Enable Record Feature Code option to queue settings. [Enable Record Feature Code]
Firmware Version 1.0.20.34
• Added the ability to restrict calls between extensions. [RESTRICT CALLS]
• Added the option to select the transport method information displayed in extension information emails in the
System Settings→Email Settings→Email Template→Edit Extension Template page. [Email Templates]
• Added configuration options User Information in Fax Header and Fax Header Information to the Call
Features Fax/T.38Fax Settings page. This will give users the option to send a special header in SIP fax
messages. [User Information in Fax Header][Fax Header Information]
• Added command to delete call recordings after downloading them. [recapi]
• Added DTMF Start Threshold and DTMF End Threshold options to the PBX Settings Interface Settings
DAHDI Settings page. [DAHDI Settings]
• Added External Disk Status alert event for monitoring external storage connection status. [System Events]
• The language of column titles in exported CDR reports and statistics reports will now be based on the UCM’s
display language. [Downloaded CDR File]
• Added 3 more room statuses and corresponding prompts: Room Cleared, Room Not Cleaned, and Room
Closed. [Room Status]
• Updated Hmobile Mini Bar request. [HMobile PMS Connector]
• Added the Ringback Tone option for inbound calls. [Special ringing tone]
• The value configured in the Server User Agent Value field will now replace the whole User-Agent header
value instead of just the “UCM6xxx” part. [Server User Agent]
• Added the ability to import/export a CSV file of the configured DODs for a specified trunk. [DOD
Import/Export]
Firmware Version 1.0.20.31
• Added parameters x-gscall-type and x-gs-group-name to the ACK From header sent by the UCM for calls
made to ring groups and queues to improve compatibility with non-Grandstream endpoints.
• Added GMT-4:00 (Atlantic Standard Time) and GMT+1:00 (Casablanca) to Time Settings [Time Zone]
• To improve UCM flash storage lifespan, syslog will no longer be written to UCM internal storage if a syslog
server is configured. [Syslog]
To Next Page
Loading...
Need help?
General
