The UCM6200 LDAP server supports anonymous access (read-only) by default. Therefore, the LDAP client does
not have to configure username and password to access the phonebook directory. The "Root DN" and "Root
Password" (limited with 64 and 32 characters respectively) here are for LDAP management and configuration
where users will need provide for authentication purpose before modifying the LDAP information.
The default phonebook list in this LDAP server can be viewed and edited by clicking on for the first
phonebook under LDAP Phonebook.
Figure 34: Default LDAP Phonebook DN
Figure 35: Default LDAP Phonebook Attributes
LDAP Phonebook
Users could use the default phonebook, edit the default phonebook, add new phonebook, import phonebook on
the LDAP server as well as export phonebook from the LDAP server. The first phonebook with default phonebook
dn "ou=pbx,dc=pbx,dc=com" displayed on the LDAP server page is for extensions in this PBX. Users cannot
add or delete contacts directly. The contacts information will need to be modified via Web
GUI→Extension/Trunk→Extensions first. The default LDAP phonebook will then be updated automatically.
To Next Page
Loading...
Need help?
General
