Grandstream Networks UCM6200 Series User Manual

P a g e | 191
UCM6200 Series User Manual
Version 1.0.20.38
LDAP Outbound Rule
Specify an outbound rule for LDAP sync feature. The UCM6200 will automatically
modify the remote contacts by adding prefix parsed from this rule.
LDAP Dialed Prefix
Specify the prefix for LDAP sync feature. The UCM6200 will automatically modify
the remote contacts by adding this prefix.
CC Settings
Enable CC
If enabled, the system will automatically alert the user when a called party is
available, given that a previous call to that party failed for some reason.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
services for a specific device at one time.
The minimum value is 1.
Table 54: Create New IAX Trunk
Type
Select the VoIP trunk type.
• Peer IAX Trunk
• Register IAX Trunk
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured. The default setting is "No".
Username
Enter the username to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Password
Enter the password to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Disable This Trunk
If selected, the trunk will be disabled.
Table 55: IAX Register Trunk Configuration Parameters
Basic Settings
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured.
The default setting is "No".

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English