Grandstream Networks UCM6200 Series User Manual

P a g e | 354
UCM6200 Series User Manual
Version 1.0.20.38
STUN Server
Configure STUN server address. STUN protocol is a Client/Server and also a
Request/Response protocol. It is used to check the connectivity between the
two terminals, such as maintaining a NAT binding entries keep-alive agreement.
The default STUN Server is stun.ipvideotalk.com.
Valid format:
[(hostname | IP-address) [':' port]
The default port number is 3478 if not specified.
BFCP UDP Start
Configure BFCP UDP port starting number. The default setting is 50000.
BFCP UDP End
Configure BFCP UDP port ending number. The default setting is 52999.
BFCP TCP Start
Configure BFCP TCP port starting number. The default setting is 53000.
BFCP TCP End
Configure BFCP TCP port ending number. The default setting is 55999.
TURN Server
Configure TURN server address. TURN server is an enhanced version of the
STUN protocol and is dedicated to the processing of symmetric NAT pronblems.
TURN Server Name
Configure TURN server account name.
TURN Server
Passsword
Configure TURN server account password.
Payload
The UCM6200 payload type for audio codecs and video codes can be configured here.
Table 101: Internal Options/Payload
AAL2-G.726
Configure payload type for ADPCM (G.726, 32kbps, AAL2 codeword packing).
The default setting is 112.
DTMF
Configured payload type for DTMF. The default setting is 101.
G.721 Compatible
Configure to enable/disable G.721 compatible. The default setting is Yes.
G.726
Configure the payload type for G.726 if "G.721 Compatible" is disabled. The
default setting is 111.
iLBC
Configure the payload type for iLBC. The default setting is 97.
H.264
Configure the payload type for H.264. The default setting is 99.
H.265
Configure the payload type for H.264. The default setting is 114.
H.263P
Configure the payload type for H.263+. The default setting is 100 103.
VP8
Configure the payload type for VP8. The default setting is 108.
Main Video FEC
Configure the payload type for Main Video FEC, The default is 120.
RTP FECC
Configure the payload type for RTP FECC, The default is 125

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English