FAX SERVER
The UCM6200 supports T.30/T.38 Fax and Fax Pass-through. It can convert the received Fax to PDF format and
send it to the configured Email address. Fax/T.38 settings can be accessed via Web GUI→Call
Features→FAX/T.38. The list of received Fax files will be displayed in the same web page for users to view,
retrieve and delete.
Configure Fax/T.38
• Click on "Create New Fax Extension". In the popped-up window, fill the extension, name and Email address
to send the received Fax to.
• Click on "Fax Settings" to configure the Fax parameters.
• Click on to edit the Fax extension.
• Click on to delete the Fax extension.
Figure 201: Fax Settings
Table 86: FAX/T.38 Settings
Configure the maximum transfer rate during the Fax rate negotiation.
The possible values are 2400, 4800, 7200, 9600, 12000 and 14400.
The default setting is 14400.
To Next Page
Loading...
Need help?
General
