3. Go to UCM6200 Web GUI→Extension/Trunk→Analog Trunks page. Create a new analog trunk. Please
make sure "Fax Detection" is set to "No".
4. Go to UCM6200 Web GUI→Extension/Trunk→Inbound Routes page. Create a new inbound route and
set the default destination to the Fax extension.
Figure 207: Inbound Route to Fax Extension
5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number will be
converted to PDF file and sent to the Email address fax@domain.local as attachment.
Figure 208: List of Fax Files
To Next Page
Loading...
