UCM6200 Series User Manual
Version 1.0.20.38
the received Fax will be sent to the Email address configured for this extension.
If no Email address can be found for the user, the Fax will be sent to the default
Email address configured in Fax setting page under Web GUI→Call
Features→Fax/T.38.
Access Control List manages the IP addresses that can register to this extension.
• Allow All: Any IP address can register to this extension.
Local Network Address: Only IP addresses in the configured network segments
can register to this extension.
If enable “All”, users do not need to enter password when making an outbound call.
If enable “Follow Me”, the call can dial out via follow me without password.
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, iLBC, ADPCM, LPC10, H.264,
H.265, H.263, H.263p and VP8.
Batch Extension Resetting Functionality
To reset multiple extensions to default settings, select the extensions on the main Extensions/Trunks-
>Extensions page and click on the Reset button. Once reset, all settings except for Concurrent Registrations
will be reverted to default. User voicemail password will be randomized again, and user voicemail prompts and
recordings will be deleted. The settings for the extension user in the User Management page will also be
reverted to default except for usernames and custom privileges.
Search and Edit Extension
All the UCM6200 extensions are listed under Web GUI→Extension/Trunk→Extensions, with status, Extension,
CallerID Name, Technology (SIP, IAX and FXS), IP and Port. Each extension has a checkbox for users to "Edit
Selected Extensions" or "Delete Selected Extensions". Also, options "Edit” , "Reboot" , "Delete" and
reset are available per extension. User can search an extension by specifying the extension number to find an
extension quickly.
Figure 84: Manage Extensions
To Next Page
Loading...
Need help?
General
