• Status
Users can see the following icon for each extension to indicate the SIP status.
Green: Idle
Blue: Ringing
Yellow: In Use
Grey: Unavailable (the extension is not registered or disabled on the PBX)
• Edit single extension
Click on to start editing the extension parameters.
• Reset single extension
Click on to reset the extension parameters to default (except concurrent registration).
Other settings will be restored to default in Maintenance→User Management→User Information except
username and permissions and delete the user voicemail prompt and voice messages.
• Reboot the user
Click on to send NOTIFY reboot event to the device which has an UCM6200 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6200 Web
GUI→Value-added Features→Zero Config→Zero Config Settings.
• Delete selected extensions
Click on the button to delete a single extension. Users can also select multiple extensions and click on
the Delete button to delete several extensions at once.
• Modify selected extensions
Select the checkbox for the extension(s). Then click on "Edit" to edit the extensions in a batch.
To Next Page
Loading...
Need help?
General
