UCM6200 Series User Manual
Version 1.0.20.38
Figure 179: Private Intercom
Table 79: Private Intercom Configuration Parameters
Configure paging/intercom group name.
Select "Private Intercom".
Configure the paging/intercom group extension.
If enabled, the UCM will replace the caller display name with Paging/Intercom
name.
Specify the maximum call duration in seconds. The default value 0 means no
limit.
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on ‘Prompt’, it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX Settings→Voice Prompt→Custom
Prompt, where they could record new prompt or upload prompt files.
Select available users from the left side to the paging/intercom group member
list on the right.
Paging/Intercom
Whitelist
Select which extensions are allowed to use the paging/intercom feature for this
paging group.