UCM6200 Series User Manual
Version 1.0.20.38
Upgrading Via Network
The UCM6200 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or HTTPS;
the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
The upgrading configuration can be accessed via Web GUI→Maintenance→Upgrade.
Figure 329: Network Upgrade
Table 145: Network Upgrade Configuration
Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Define the server path for the firmware server.
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6200.
If configured, only the firmware with the matching encrypted postfix will be
downloaded and flashed into the UCM6200.
The username for the HTTP/HTTPS server.
To Next Page
Loading...
Need help?
General
