UCM6200 Series User Manual
Version 1.0.20.38
Table 147: Cleaner Configuration
Enable the CDR Cleaner function.
Enter 0-23 to specify the hour of the day to clean up CDR.
By Schedule: If the clean interval is 3, cleaning will be performed every 3
days to remove all records that were generated in the past 3 days.
• Keep Last X Records: If the max number of CDR has been reached,
CDR will be deleted starting with the oldest entry at the configured
cleaning time. (Note: The amount of records displayed on the page of
call queue statistics is not one-to-one with the actual amount of records
in the database.)
• Keep Last X Days: Delete all entries older than X days.
Enter 1-30 to specify the day of the month to clean up CDR when By
Schedule is selected as Cleaning Conditions.
Set the maximum number of CDR entries to keep when Keep Last X
Records is selected as Cleaning Conditions.
Default is 50000. Valid range: 10000 – 100000.
Enter the number of days of call log entries to keep when Keep Last X days
is selected as Cleaning Conditions.
Default is 30. Valid range: 1 – 100.
Queue Statistics Report Cleaner
Enable scheduled queue log cleaning.
Enter the hour of the day to start the cleaning. The valid range is 0-23.
• By Schedule: If the clean interval is 3, cleaning will be performed every
3 days to remove all records that were generated 3 days ago.
• Keep Last X Records: If the max number of Queue Statistics Report
entries has been reached, Queue Statistics Report entries will be
deleted starting with the oldest entry at the configured cleaning time.
(Note: The amount of records displayed on the page of call queue
statistics is not one-to-one with the actual amount of records in the
database.)
• Keep Last X Days: Delete all entries older than X days.
Enter how often (in days) to clean queue logs when By Schedule is
To Next Page
Loading...
Need help?
General
