Upload Language Package
On the UCM6200, if the user needs to replace some specific customized prompt, the user can upload a single
specific customized prompt from Web GUI→PBX Settings→Voice Prompt→Language Settings instead of the
entire language pack.
Figure 162: Upload Voice Prompts Package
The package file should follow below requirements:
▪ Each file uploaded must be under 50MB.
▪ Package structure:
[Package]
├ [voice prompt dir]
│ ├ [... dir]
│ └ [... files]
└ info.txt (containing the language name for display, in UTF8)
▪ Language dir name format:
▪ Custom dir name format: language_xxx;
For example: If there is a Chinese custom directory named zh_xxx, the custom voice prompt in zh_xxx
would be used first, then the Chinese voice prompt zh, then use the default language prompt (en); If
not named the format as above, then the custom prompt will be used first, then use the default language
prompt (en).
For more details, please refer to:
http://www.grandstream.com/sites/default/files/Resources/ucm_voiceprompt_customization_guide.zip
To Next Page
Loading...
Need help?
General
