o The voicemail system will now mention if a voicemail is from a ring group. [Enable Destination]
• [Voice Prompt]
o Voice prompt package upload file size limit increased to 50MB. [Upload Language Package]
o Custom voice prompt file name character limits for the Voice Prompt and Announcement Center
pages have been changed to 100. [Upload Custom Prompt] [ANNOUNCEMENTS CENTER]
[Announcement]
• [VoIP Trunks]
o PAI headers now have a character limit of 64 and can only contain alphanumeric characters and/or
special characters #*-_+. [PAI Header]
o When editing a register trunk or trunk group and TLS is selected in the Transport field, users can
now select between SIP and SIPS URI scheme. [SIP URI Scheme When Using TLS]
o Domain names can now be sent in the request URL by configuring the From Domain field. [From
Domain]
• [Security]
o Added support to specify minimum/maximum TLS version. [TLS Security]
Firmware Version 1.0.19.29
• Updated extension DND response. [General Call Failure Tone]
• Added feature codes for remote management of extension call forwarding. [Remote Call Forward
Enable]
• The wakeup service prompt now has an option to set a wakeup for the next day. [Wakeup Service]
Firmware Version 1.0.19.27
• Added new option Email-to-Fax Subject Format to allow email subjects to consist of only the fax number.
[Email-to-Fax Subject]
• Added new options Auto Record to automatically record emergency calls and Send Recording File to
send these recordings to a configured email address. [Auto Record]
• Increased concurrent registration limit to 300 for UCM62xx’s wave web interface. [Wave WebRTC Video
Calling & Conferencing]
• Added Emergency Recordings page to display recordings of emergency calls. [EMERGENCY]
• Added a toggle checkbox to enable/disable Announcement Paging. [Enable]
• Queue position will now be announced to the caller upon entering the queue. [Enable Position
Announcement]
• Added new option Enable Hold time Announcement to announce estimated wait times to caller. [Enable
Hold time Announcement]
• Added a new option “Block the Backward Collect Call” to automatically block collect calls/reverse charge
calls. [Block ]
To Next Page
Loading...
Need help?
General
