UCM6200 Series User Manual
Version 1.0.20.38
Call Forward No Answer
Deactivate
Call Forward Unconditional
Activate
• Default Code: *72
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
Remote Call Forward Enable
• If enabled, this option will allow specific extensions to dial the
remote call forwarding feature codes to set call forwarding for
any extension.
Remote Call Forward Busy
Enable
• Default Code: *65
• Enter the code and follow the voice prompt to set the
remote extension number where you want to enable Call
Forward Busy and the target destination.
Remote Call Forward Busy
Disable
• Default Code: *651
• Enter the code and follow the voice prompt to set the
remote extension number where you want to disable the
Call Forward Busy.
Remote Call Forward No Answer
Enable
• Default Code: *66
• Enter the code and follow the voice prompt to set the
remote extension number where you want to enable Call
Forward No Answer and the target destination.
Remote Call Forward No Answer
Disable
• Default Code: *661
• Enter the code and follow the voice prompt to set the
remote extension number where you want to disable the
Call Forward No Answer.
Remote Call Forward
Unconditional Enable
• Default Code: *67
• Enter the code and follow the voice prompt to set the
remote extension number where you want to enable Call
Forward Unconditional and the target destination.
Remote Call Forward
Unconditional Disable
• Default Code: *671
• Enter the code and follow the voice prompt to set the
remote extension number where you want to disable the
Call Forward Unconditional.
Remote Call Forward Whitelist
Only the Extensions selected in this whitelist can configure call
forwarding for any extension via feature codes.