Grandstream Networks UCM6200 Series User Manual

P a g e | 338
UCM6200 Series User Manual
Version 1.0.20.38
Feature Codes
Voicemail Access Code
• Default Code: *98
• Enter *98 and follow the voice prompt. Alternatively, dial *98
followed by the extension and pound (#) to immediately access
the entered extension's voicemail box.
My Voicemail
• Default Code: *97
• Press *97 to access the voicemail box.
Agent Pause
• Default Code: *83
• Pause the agent in all call queues.
Agent Unpause
• Default Code: *84
• Unpause the agent in all call queues.
Paging Prefix
• Default Code: *81
• To page an extension, enter the code followed by the extension
number.
Intercom Prefix
• Default Code: *80
• To intercom an extension, enter the code followed by the
extension number.
Blacklist Add
• Default Code: *40
• To add a number to blacklist for inbound route, dial *40 and
follow the voice prompt to enter the number.
Blacklist Remove
• Default Code: *41
• To remove a number from current blacklist for inbound route,
dial *41 and follow the voice prompt to remove the number.
Call Pickup on Ringing
• Default Code: **
• To pick up a call for any extension xxxx, enter the code followed
by the extension number xxxx.
Pickup In-call
• Default Code: *45 (Disabled by default).
• If “Pickup In-call” feature is enabled, only the extensions added
in “Allowed to seamless transfer” in the extension’s Seamless
Transfer Privilege Control List” can pick up the call.
Pickup Extension
• Default Code: *8
• This code is for the pickup group, which can be assigned for
each extension on the extension configuration page.
• If there is an incoming call to an extension, the other extensions
within the same pickup group can dial *8 directly to pick up the
call.

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English